Skip to Content

DrARTEX Armor (3.5mm, 2026-B)

Catalog product
Prices, stock, and purchase options are handled by inquiry or through the official regional DrARTEX store path.
Ask About This Product Official Store & Guide
DrARTEX.com is a product catalog and inquiry site. Pricing, availability, and purchasing depend on country and channel.
Technical data

Specifications

Description

DrARTEX Armor Extreme is a 3.5 mm rigidity-focused vibration damper developed for demanding vehicle panels and low-frequency resonance control. It is suited to specialist audio installations as well as areas where stronger damping performance is required.

The five-layer construction uses two layers of modified composite butyl polymer and two layers of tempered aluminium foil, backed by a self-adhesive installation layer. The structure is designed to increase stiffness, damping efficiency, and durability.

Application

Install on clean, dry painted surfaces, including complex areas. Do not apply to corroded metal. Clean with water and a neutral detergent, allow the surface to dry, then degrease with a suitable solvent and let it dry completely. Press the material firmly from the centre outward to avoid trapped air, then roll it thoroughly. Apply in a working environment between +18 and +35°C.

Storage

Material should be stored inside at temperature not higher than +40°С in horizontal position on a flat surface at a distance not less than 1 m from any heating systems; avoid any wet conditions and contacts with oils and direct sun.
Do not stack the materials more than 1.2m in height.

Name of index Value Testing method
Material Thickness 3.5mm
Dimension (W*L*H) 50 x 30cm per sheet
Sheets per Package 18
Sheet Length 50cm
Sheet Width 30cm
Total Sheet Area 2.7m²
Package Contents 18 sheets 50x30cm
Packaging Type Corrugated cardboard carton
Package Dimension (W*L*H) 55.5 x 33.1 x 7.9cm
Foil (Inner) Thickness 40µm +/-5%
Mastic G-4 + KM-2
Foil (Outer) Thickness 90µm +/-5% GOST 17073-71
Mechanical Loss Factor on metal plate with thickness 1mm at temperature less than +20ºС > 0.44 DIN EN ISO 6721- 3:1994 (method-А)
Fire risk, burning rate Non-flammable, <100mm/min ISO 3795-76
Durability of connection between the material and the metal surface during flaking-off >11.0N/cm ISO 813:2010
Operating Temp. Range -40 to +90°C
Max. Temp. Intermittent 150°C
Package volume 0.01451m³ +/-10%